Your cart is empty
Looks like you haven't added anything to your cart yet
TODAY TO JULY 5
Independence Day & Canada Day Sale
SAVE 20% ON
All Products
DISCOUNT EXPIRES IN 2 WEEKS!
LIMETED SALE! SAVE 20%!
LIMETED SALE! SAVE 20%!
Total price:
- Price
- $21
SIDEWAYS INSTALLATION IS A SNAP!
It's so simple that even folks who are just starting out can do it themselves with minimal carpentry experience.
Installs faster and easier than plug style systems.
Simple, carefree maintenance.
Easily retrofit old 2x2 wood railings without dismantling the existing railing.
You will love the elegant architectural style and design.
SNAP LOCK BALUSTERS ARE PERFECT FOR RETROFITTING OLD WOOD RAILINGS
Replace old worn 2x2 wood pickets with Snap Lock Balusters without having to dismantle the entire railing.
Sideways installation makes this possible!
STEP 1
STEP 2
STEP 3
STEP 4
With traditional plug systems, you have to take down the entire railing and rebuild from scratch.
Make sure to measure the gap between your upper and lower 2x4 rails and pick the 25" or 31" and then cut them down to your specific gap less 1/2" for the thickness of the base connectors.
Aluminum is so easy to cut and is not subject to oxidization the same way ferrous metals are.
This saves you a lot of time and money. But the best thing is that you just gave your old worn out wood railing a brand new life.
Customer Reviews
Based on 3 reviews
67%
(2)
0%
(0)
0%
(0)
0%
(0)
33%
(1)
D
You must use their balusters. Slide down connectors are exactly 3/4” and will not slide over a 3/4” square baluster. Obviously, their balusters must be slightly smaller than 3/4”. Base pieces will work but slide lock pieces will not slide around. I got balusters from another company and they measured exactly 3/4”. The opening of these slide locks is also 3/4”. Obviously needs to be larger opening to go AROUND 3/4” square balusters.
D
Fantastically tight tolerances, very high quality control, fit hand-in-glove with Titan balusters. Seem to be very sturdy.
S
Rich,
Thanks for the opportunity to respond to your review request. I installed 50 balusters in an outdoor screened porch. The need to install balusters was that the owner's dogs liked to lay against the screen material tearing it in many places. The balusters resolved the screen issue and enhanced the overall design. The only issue I had was the snap'n connector caps would not consistently slip down and cover the base locking the balusters in place. After many trial and error attempts to slide the caps over the bases I discovered the issue. Inside each cap there are ridges that provide the strength to the cap. On three of the sides there are four internal ridges, and one side the cap only has three ridges. In order for the caps to slip down easily and cover the base the three ridges side must face on the open side of the base. I did not find anything in the instructions indicating the cap must be oriented in this manner. Once I discovered it the job went quickly and easily. Since installing the balusters, the owner has had many positive compliments from family and friends. I think your product is excellent in design and quality and added a lot of improvement and benefits on the job,
Steve A.
- Choosing a selection results in a full page refresh.
