- Home
- Accessories
Accessories

Center Guide for Hole Saws
$5.27
Our Center Guides quickly locate and guide hole saws to the center of either 4x4 or 6x6 posts for preparing to use the Titan Wood Post Anchor. No more tracing out diagonal lines for pilot cuts.Just hold against the corner of the post and saw against the vertical guides. Works for nominal 4x4 (3-½" x 3-½") and 6x6 (5-½" x 5-½") posts.

G-Tape 3040 BK Flashing Tape
$24.97
G-Tape 3040BK Flashing Tape has become a "must have" solution for deck builders across the country because of its extreme performance and simplicity. No other flashing tape performs like it. Deck joist life span is greatly increased. Why You Need It Sticks to exterior surfaces in temperatures ranging from -20°F to 200°F. Sticks to the toughest ...

#3 Square Six Inch Driver Bit
$5.99
Make sure to use this #3 Driver Bit when installing your Titan Wood Post Anchors to make sure you have the perfect fit for your wood screws. The long length of the bit allows for easy access to the base of your post for easy installation.

Post Brace
$12.74
Use the Post Brace if you need even more strength for your application. It provides additional stiffness to either the mid-span of any long run of posts or at an end post near a house or wall. Hot zinc galvanized and powder coated for superior performance and includes #12x3" screws for both deck and post connections.

#14x4" Black Flat Head Screws (8pcs)
$4.97
#14x4" Black Flat Head Screws (8pcs) secure the Titan Wood Post Anchor to wood or composite surfaces and work with those post anchors which have counter sunk screws holes. You will notice the Hot Zinc only post anchors do not have counter sunk holes and require pan head or hex head lags screws to be secured to surfaces. Pick up a handy pack of ...

3/8x5" Galv. Hex Head Lag Screws (4 pcs)
$4.97
3/8" x 5" Galv. Hex Head Lag Bolts (4 pcs). These are manufacturer recommended fasteners for securing the 4x4, 4x6, 6x6 and 8x8 Titan Wood Post Anchors to posts. Follow the installation instructions with each post anchor and the pre-drilling guide. Hot dip galvanized for superior performance. Pick up a handy pack of these screws if you bough...

1/4"x3" Galv. Hex Head Lag Screws (4 pcs)
$1.97
1/4" x 3" Galvanized Hex Head Lag Screws (4 pcs) are recommended for use with the Deck Foot Anchor Post Saddles.

Concrete Screws - Flat Socket Head
$22.97
Concrete Screw Flat Socket Head These flat socket concrete screws are a great solution for anchoring post anchors to concrete surfaces. The flat head seats nice and flush with the Titan Wood Post Anchor and are heavily coated with genuine blue zinc dichromate to protect from corrosion. Use a No. 3 square driver bit. Includes 50 pieces and a 3/1...

Gasket Kit
$5.97
Get a waterproof seal with our high quality EPDM rubber Gasket Kit and nylon spacers for 4x4 or 6x6 Titan Wood Post Anchors.Perfect for use on waterproof surfaces where your fasteners are puncturing the sealed surface. Use with or without gasket sealing caulking.Also useful where attaching the anchor to concrete in climates that have freezing ...

Self-Drilling Metal Screws
$2.97
Self-Drilling Metal Screws These Self-Drilling metals screws are a great solution to install the Pergola Post Brackets for variable sized posts with the Deck Foot Anchor. Use a 3/8" x 1-7/8" Hex Socket DriverAvailable in: 8, 24 or 50 packs

#14x3" Stainless Flat Head Screws (8pcs)
$7.97
#14x3" Stainless Flat Head Deck Screws (8pcs) secure Stainless Titan Wood Post Anchor to wood or composite surfaces and work with those post anchors which have counter sunk screws holes. You will notice the Hot Zinc only post anchors do not have counter sunk holes and require pan head or hex head lags screws to be secured to surfaces. Pick up a...

3/8x5" Stainless Hex Head Lag Screws (4 pcs)
$10.49
3/8" x 5" Stainless Hex Head Lag Bolts (4 pcs). These are manufacturer recommended fasteners for securing the 4x4 and 6x6 Stainless Titan Wood Post Anchors to posts. Follow the installation instructions with each post anchor and the pre-drilling guide.