- Tech Specifications
- Shipping Details
- Installation Video
- Product Reviews
The SkyLift Roof Riser is one of the very best solutions available to help you build patio covers of all sizes.
The SkyLift hardware system makes perfect sense and you will appreciate the benefits:
- Sealed with standard flashings
- Easy to install
- More head room
- More air flow for heat and BBQ fumes
- Visually appealing
- Structurally sound - attaches to top of exterior wall
Traditional Patio Roof Building Techniques
The SkyLift Roof Riser installs securely to the top plate of any bearing wall with ¼” x 3” Simpson Strong-tie SDS screws included with each unit. Just cut an access hole (minimum 3-1/2” x 6”) through the roof decking directly over the bearing wall to install. Then slide a standard pipe jack flashing over the support tube and then the pipe end flashing (included) over for a perfect seal.
Choose the Standard Duty Riser for lighter weight patio covers like a polycarbonite panel or the Heavy Duty Riser for gable style roofs or any heavier structure. If you live on the coast, choose the Heavy Duty Hot Zinc Galvanized Riser to withstand the effects of salt air.
Saddles are available in 4x or 6x beam sizes. Designed to support in excess of 3,800 lbs. Will easily support 1,250 to 1,750 lbs that standard 2x4 top plate and wall studs at 16" on center will support between studs.
The Skylift Roof Riser has been tested for uplift and performed very well. The test actually showed the roof acted like an airfoil on the back of a car rather than a wing. Contact us to get a copy of the testing data.
For the strongest support post connection, set ground rated pressure treated posts into a 36" concrete hole or use one of the Perma-Column products for a superior structural solution.
If you are planning to build a patio roof this year, take a serious look at what you can do with the SkyLift Roof Riser hardware.
|Models||Standard duty or Heavy duty|
|Finish||Baked powder coat or Hot zinc galvanized|
|Height||18", 24", 30", 36"|
Standard duty - 1-1/2" dia. tube
Use a standard pipe jack flashing with a 1-1/2" or 2" diameter available at any building materials store. The pipe end flashing sealer ring is included with each unit.
|Other||Includes 4 ea. ¼” x 3” Simpson Strong-tie SDS screws|
Download the full size installation Guide here. Or view a smaller version below:
Shipping charges apply to this product because of its weight.
If purchased with other products that are subject to our "$7 or Free" program, the applied shipping charge will apply only to this product.
| No reviews for this product.