"Absolutely the easiest system I’ve ever used. A fantastic well-developed product. I would definitely recommend this product to anyone building or remodeling a deck. "
- Jeffrey W., Snap 'n Lock Customer
Snap'n Lock™ Stair Adapter Plus Connector Packs include everything you need to build a stair - except the balusters themselves. You get the Stair Adapters and horizontal Snap'n Lock™ Connectors and screws in one convenient pack. So you can use our connectors with other manufacturers 3/4" round aluminum balusters if you wish. Here's what you get:
These are set at a 35° which is an optimum angle for the common building code rise and run ratio for residential stairs. Stairs could range from 33° to 38° and they will still work fine.
All that changes is that the baluster will be oriented slightly off its normally perpendicular or vertical trajectory from the interior base of the Snap’n Lock™ Connector.
"Absolutely the easiest system I’ve ever used. A fantastic well-developed product. I would definitely recommend this product to anyone building or remodeling a deck. "
- Jeffrey W., Snap 'n Lock Customer
Snap'n Lock™ Stair Adapter Plus Connector Packs include everything you need to build a stair - except the balusters themselves. You get the Stair Adapters and horizontal Snap'n Lock™ Connectors and screws in one convenient pack. So you can use our connectors with other manufacturers 3/4" round aluminum balusters if you wish. Here's what you get:
These are set at a 35° which is an optimum angle for the common building code rise and run ratio for residential stairs. Stairs could range from 33° to 38° and they will still work fine.
All that changes is that the baluster will be oriented slightly off its normally perpendicular or vertical trajectory from the interior base of the Snap’n Lock™ Connector.
Replace old worn 2x2 wood pickets with Snap Lock Balusters without having to dismantle the entire railing.
Sideways installation makes this possible!
With traditional plug systems, you have to take down the entire railing and rebuild from scratch.
Make sure to measure the gap between your upper and lower 2x4 rails and pick the 25" or 31" and then cut them down to your specific gap less 1/2" for the thickness of the base connectors.
Aluminum is so easy to cut and is not subject to oxidization the same way ferrous metals are.
This saves you a lot of time and money. But the best thing is that you just gave your old worn out wood railing a brand new life.
The elevation contact points for the 2x4 rail connectors depict one possible configuration resulting in the top rail meeting the newel post at 36" above the deck surface.
The gap between the underside of the lower rail and the surface of the treads may permit a 6" ball to fit underneath but never greater. The bottom rail may be set lower to the nosing of the tread if desired.
The angle of typical code-compliant stairs ranges between 34°-35°. Baluster lengths shown here assume the Snap'n Lock connector and stair adapters are used. Baluster lengths may vary if the angle changes but rarely exceed 25".
Download a full-size copy of the Warranty.
SNAP'N LOCK STAIR BALUSTER KIT-ROUND
SNAP'N LOCK STAIR BALUSTER KIT-SQUARE
SHADOW RAIL™ CONNECTOR - STAIR
SNAP'N LOCK BALUSTER KIT-ROUND
SNAP'N LOCK BALUSTER KIT-SQUARE
SHADOW RAIL CONNECTOR - LEVEL
Take a selfie video with your deck or project in the background and post it to Instagram or Facebook using hashtag #DecksGo.Then email it to decksgo.com and we will send you a Starbucks Gift Card.
View Cart
